End User Product Specification

PS/2 Mouse-Port MOUSE-TRAK Desktop Industrial Trackball
Model B-MPIND

1.0   Scope:
This specification describes the functional, physical, and environmental characteristics of the PS/2 Mouse-port Desktop Mouse-Trak Industrial.

2.0   Functional Specifications:
2.1 Resolution: 192 to 576 pulses per revolution of the ball.
2.2 Input Switches: Three (3)
2.3 Interface: IBM PS/2
2.4 Connector: 6-Pin Mini-Din Male
2.5 Pin Assignments: Pin 1 = PS/2 Data
Pin 2 = NC
Pin 3 = Common
Pin 4 = +5V
Pin 5 = PS/2 clock
Pin 6 = NC
2.6 Compatibility: Microsoft Mouse Protocol, Logitech Mouse Protocol
2.7 OS Certifications: Microsoft Windows 95, Microsoft Windows NT 4.0
2.8 Switches: Mechanically limited, break resistent
2.9 Cable: 96"+-0.5" (Custom lengths available), double shielded, 100% coverage
2.10 Power Consumption: Idle: 8mA
Max: 12mA

3.0   Mechanical Specifications:
3.1 Dimensions: Approximately 4"wide x 8"long
3.2 Weight: 1.3 lbs.
3.3 Body Material: Glass filled Xenoy thermoplastic, black
3.4 Ball Material: Cast Phenolic Resin
3.5 Ball Hardness: Rockwell H 85
3.6 Tracking Force: 1.5 oz. maximum, 0.5 oz. typical (15g)
3.7 Ball Load: 250 lbs. maximum downward
3.8 Ball Speed: 500 RPM maximum
3.9 Hand Pad: Injection-molded vinyl, black

4.0   Environmental Specifications:
4.1 Operating Temperature: 0 to +50 degrees Celcius
4.2 Storage Temperature: -20 to +60 degrees Celcius
4.3 Humidity: 0 to 95% non condensing

5.0   Accessories:
A dust ring is included for dust-sensitive applications

6.0   Documentation:
Included instruction manual

7.0   Labeling:
Standard MOUSE-TRAK labeling

8.0   Packaging:
Each unit is packaged in an individual, protective container which may display a bar-coded label of the customer's specification

9.0   Special Features:
9.1 Right/Left-handed modes: Yes. See manual for programming instructions
9.2 Programability:
Middle Key:
The middle key may be set for the auxiliary function, a primary click-and-drag, or a primary double-click. See manual for programming instructions.
Right (Secondary in right-handed mode) Key:
The right key may be set for either secondary click or secondary click-and-drag. See manual for programming instructions.
Programming Note:
Programming will reset to factory default if the MOUSE-TRAK receives a reset signal from the host computer.

Model Drawings
Internet Explorer (PC):Right click on the desired file, select "Save Target As", and follow the directions for saving to disk.
Netscape Navigator (PC/X-Windows):Right click on the desired file, select "Save Link As", and follow the directions for saving to disk.
Internet Explorer (Mac):Click and hold on the desired file, select "Download to Disk", and follow the directions for saving to disk.
Netscape Navigator (Mac):Click and hold on the desired file, select "Save this link as", and follow the directions for saving to disk.
Description Available Formats
AutoCAD/R14
(DWG)		 Portable Network Graphics
(PNG)
Unit Assembly 1000250a.dwg (73K) 1000250a.png (39K)
Panel/Table Mounting Instructions 1000727_.dwg (56K) 1000727_.png (35K)
Cable 1000115_.dwg (56K) 1000115_.png (49K)

All AutoCAD drawings, PNG images of AutoCAD drawings, and MOUSE-TRAK specifications are ©1998 ITAC Systems, Inc. All Rights Reserved.