End User Product Specification

RS-232 (Serial), "no button" MOUSE-TRAK Panel Mount Industrial Trackball
Model P-SERNB

1.0   Scope:

This specification describes the functional, physical, and environmental characteristics of the RS-232 (Serial) "no button" Mouse-Trak Panel Mount Industrial.

2.0   Functional Specifications:

2.1	Resolution:	192 to 576 pulses per revolution of the ball.
2.2	Input Switches:	None (0)
2.3	Interface:	RS-232C, 1 start bit, 8 data bits, 2 stop bits
2.4	Connector:	DB-9 Female with locking hardware plus 4 pairs of key wires plus 1 +5VDC power wire
2.5	Pin and Key Wire Assignments:	Pin 1 = NC Pin 2 = RXD Pin 3 = TXD Pin 4 = DTR Pin 5 = GND Pin 6 = DSR Pin 7 = RTS Pin 8 = CTS Green = Primary Key White = Common Red(1) = Secondary White = Common Black = Speed Key White = Common Blue = Key 3 / Auxiliary White = Common Red(2) = +5VDC
2.6	Compatibility:	Microsoft Serial Mouse Protocol, Mouse Systems Protocol
2.7	Switches:	None
2.8	Cable and Wires:	Cable: 96"+-0.5" (Custom lengths available), double shielded, 100% coverage. Wires: 8 x 18"
2.9	Power Consumption:	Idle: 80mA Max: 80mA

3.0   Mechanical Specifications:

3.1	Dimensions:	Approximately 3.99"wide x 3.75"long
3.2	Weight:	1.0 lbs.
3.3	Body Material:	Glass filled Xenoy thermoplastic, Black
3.4	Ball Material:	Cast Phenolic Resin
3.5	Ball Hardness:	Rockwell H 85
3.6	Tracking Force:	1.5 oz. maximum, 0.5 oz. typical (15g)
3.7	Ball Load:	250 lbs. maximum downward
3.8	Ball Speed:	500 RPM maximum
3.9	Hand Pad:	N/A

4.0   Environmental Specifications:

4.1	Operating Temperature:	0 to +50 degrees Celcius
4.2	Storage Temperature:	-20 to +60 degrees Celcius
4.3	Humidity:	0 to 95% non condensing

5.0   Accessories:

None

6.0   Documentation:

None

7.0   Labeling:

Standard MOUSE-TRAK labeling (UPC A bar code)

8.0   Packaging:

Each unit is heavily packaged and sealed in bubble wrap.